Picture a 35-employee plant in Drummondville. Health and safety is handled “the way it always has been”: a binder in the foreman’s office, a training session delivered four years ago, and the belief that the CNESST mostly deals with mines and construction sites. Since October 1, 2025, that assumption no longer holds. Bill 27 now places training and prevention obligations on the employer, on every employer, no matter the sector. And several deadlines land squarely in 2026.
Key takeaways
- Bill 27 modernizes Quebec’s OHS regime; since October 1, 2025, the regulation on prevention mechanisms applies at the establishment level.
- With 20 or more workers: committee, representative and prevention program; with fewer than 20: liaison officer and action plan.
- October 1, 2026 is a key deadline, and the new roles require training.
In this article
- Bill 27 in two minutes: where it comes from and why it catches up with you in 2026
- The 20-worker threshold: two very different regimes
- The employer’s training obligations under Bill 27
- The real deadlines to put on your calendar
- Psychosocial risks: the new element that throws plant management off balance
- Where to start without spending your evenings on it
The problem is that almost everything written on the subject is aimed at lawyers. Here is what matters, in plain shop-floor terms: what applies based on your size, who needs to be trained, and which dates to mark on the calendar.
Bill 27 in two minutes: where it comes from and why it catches up with you in 2026
The Act to modernize the occupational health and safety regime, which everyone calls Bill 27, was passed in October 2021. It overhauls a regime dating back to 1979, one that reserved real prevention obligations for a handful of so-called priority sectors. Mines, construction, and a few others were held accountable. The machine shop, the distribution warehouse, or the industrial bakery, far less so.
The rollout has happened in stages since 2022. The biggest step has just been taken: since October 1, 2025, the Regulation respecting prevention and participation mechanisms within establishments applies to every establishment in Quebec. The official text of the regulation (LégisQuébec, in French) confirms it in black and white. And because the regulation grants a one-year window for several obligations, the bill comes due in 2026.
The 20-worker threshold: two very different regimes
Everything starts with the number of workers at your establishment. Not the company as a whole: the establishment, meaning each physical location. That said, the regulation does allow, under certain conditions, grouping establishments with similar activities under a single program and a single committee.
At 20 workers and more, three pieces become mandatory. First, a joint health and safety committee, made up of management and worker representatives, meeting four to nine times a year depending on your sector’s risk level. Next, a health and safety representative, chosen by the workers, who gets paid release time each month to inspect the premises and flag issues. Finally, a written prevention program that catalogues the risks in your workplace and the measures to control them, from elimination at the source through to protective equipment.
Under 20 workers, the regime is lighter, but very real. You must appoint a health and safety liaison officer, a member of the team who bridges the floor, management, and the CNESST. You must also produce an action plan: a simplified version of the prevention program that identifies the risks and spells out who does what, and by when. If you had already named a liaison officer under the interim regime in place since 2022, you start with a head start.
The employer’s training obligations under Bill 27
This is where many management teams discover the scale of the job: these new roles cannot be improvised. Bill 27 places specific training obligations on the employer’s shoulders. Health and safety committee members and the health and safety representative must complete training leading to a certification, with a base deadline of 120 days after their appointment. The representative must also refresh that knowledge every two years. As for the liaison officer in small establishments, their training must be completed within the year following their appointment.
On top of these new requirements sits one that already existed and that the reform puts back in the spotlight: the Act respecting occupational health and safety requires the employer to give each worker the training, coaching, and supervision needed to do the job without getting hurt. In concrete terms: WHMIS for anyone handling hazardous products, forklift operator training before handing over a forklift, lockout-tagout before opening a machine. When an inspector shows up after an incident, they do not ask whether “the guy knew.” They ask for the certifications, with the dates.
These job-specific training sessions are not decorative. They are the raw material of your prevention program or action plan: a risk identified without associated training is an empty box the inspector spots right away.
The real deadlines to put on your calendar
As of summer 2026, here are the confirmed milestones:
- October 1, 2026: your prevention program (20 workers and more) or your action plan (under 20) must be developed and implemented, then updated every year thereafter.
- Also October 1, 2026: establishments classified in the highest risk level that had neither a committee nor a representative as of September 30, 2025 must have them in place. Lower risk levels follow in successive waves, through to spring 2028 for the lowest-risk workplaces.
- Training for the committee and the representative: a base deadline of 120 days after appointment, with transitional deadlines confirmed by the CNESST, spread between spring 2026 and fall 2027 depending on the risk level.
- Training for the liaison officer: to be completed within the year following their appointment.
In other words, if nothing has been started at your workplace, fall arrives fast. First thing to check: the risk level tied to your line of business, which the CNESST publishes and which sets several of your deadlines.
Psychosocial risks: the new element that throws plant management off balance
The modernized regime no longer talks only about machine guards and hearing protection. Psychosocial risks, such as chronic overload, harassment, and violence, including domestic violence that spills into the workplace, must now be identified and addressed in your prevention program or action plan, on the same footing as noise or falls. For a plant manager used to measuring decibels, the terrain is less familiar. Yet it is an angle the CNESST examines more and more, and the employer training obligations set out by Bill 27 also cover the analysis of these risks.
Where to start without spending your evenings on it
First instinct: count your workers by establishment and confirm your risk level. Second: appoint the right people, aiming for those with credibility on the floor, not just an open slot in the schedule. Third: take inventory of the training already delivered. In most SMEs, the picture is better than feared, but nothing is documented. The evening foreman showed lockout-tagout to the new hire, nobody signed anything, and the maintenance guy who knew the press by heart is retiring in December.
On the budget side, two pieces of good news. If your payroll makes you subject to Quebec’s 1% training law, these expenses count toward the calculation: you do not pay twice. And covering the basics does not cost a fortune: online WHMIS runs for less than $25 per person, and our training catalogue even includes a free course on lockout-tagout.
That leaves the cost of inaction. Inspectors now check these mechanisms during their visits and can issue corrective notices and statements of offence. The real loss, however, is not the fine. It is the accident that could have been prevented, the production stoppage that follows, and the difficulty recruiting once word about the floor starts to spread.
📚 Read next
Want to know where your SME stands before the October deadline? Our free online self-assessment takes a few minutes and gives you a candid picture of your gaps. If you would rather talk it through, get in touch.


