← All articles

You have an exceptional operator. They know their machine inside out. So you hand them the new hires. Three weeks later, the new hire is lost and the operator is discouraged. It’s nobody’s fault. Knowing how to do a task and knowing how to teach it are two different skills.

Key takeaways

  • Being an expert at a task and knowing how to teach it are two different skills. The second one can be learned.
  • Choose a mentor for their patience and clarity, not just their speed.
  • Short training, protected time and a simple tracking sheet turn a good operator into a good mentor.

In this article

  1. The expert trap
  2. Choosing the right mentor
  3. What a mentor needs to learn
  4. The 4 steps of a good session
  5. Giving the mentor time
  6. Tracking progress

The expert trap

After years on the same machine, experts no longer think about what they do. Their moves have become automatic. They no longer know what they know. That’s exactly what makes them excellent… and hard to follow.

Here are the most common mistakes of an expert who trains without being prepared:

  • They go too fast. To them, the task is simple.
  • They skip steps. The ones they do without thinking.
  • They use jargon. The new hire doesn’t know those words yet.
  • They do it themselves. It’s faster than explaining.
  • They get impatient. They forget they were once beginners too.

Choosing the right mentor

The best mentor isn’t always the fastest operator. Look for these four qualities instead:

🧘

Patience

They’re willing to repeat. They let the new hire make safe mistakes.

🗣️

Clarity

They explain simply, with words everyone understands.

🦺

Rigour

They follow the safety rules themselves. They set the right example.

🤝

Desire to share

They’re proud to pass on their trade. You can’t force that.

A good test: ask them to explain their task as if you had never seen the machine. Listen to whether they simplify or get tangled up.

What a mentor needs to learn

Training a mentor doesn’t take weeks. But they need to master five things:

  • Breaking a task down into simple steps. A visual work instruction helps a lot.
  • Using the “show me” method: explain, demonstrate, have them do it, have them explain it back. We cover it in our article on training immigrant workers.
  • Giving useful feedback: say what’s good first, then what to correct.
  • Assessing the learner’s level: still in training, or autonomous?
  • Recording progress, so the training leaves a record.

The 4 steps of a good session

1

Prepare

The workstation is ready. The instruction sheet is at hand. The mentor knows which part of the task they’re showing today.

2

Show and explain

The mentor does the task slowly. They name each step. They say why each key point matters.

3

Have them do it and correct

The learner does the task. The mentor watches. They step in only for danger or a major mistake.

4

Validate and record

The learner explains what they did. The mentor records the progress and plans the next step.

A short, well-run session beats a full day where the new hire watches without touching anything.

Giving the mentor time

This is often where everything is decided. A mentor who must train while keeping full production will cut corners on training. That’s human.

✅ Do

  • Lower their production target during pairing
  • Schedule the sessions
  • Give them one or two learners at a time
  • Recognize the role: title, bonus or thanks
  • Check in with them every week

❌ Avoid

  • Adding training on top of their normal workload
  • Picking the mentor by default, because they’re there
  • Switching learners every week
  • Leaving the mentor alone, with no follow-up
  • Blaming them if the learner fails without support

Tracking progress

To know whether mentoring works, you have to measure it. A skills matrix shows who is still learning and who has become autonomous. A simple sheet per learner is enough to track each task.

Your best operator won’t become a good trainer by chance. They’ll become one because you prepared them.

When documented, mentoring also has financial value. Structured mentoring generally counts toward Quebec’s 1% law. The PAMT program can also give access to a tax credit. See our article on structured mentorship and the PAMT.

Finally, well-trained mentors are your best protection when an expert retires. See our 90-day plan for a key employee’s departure.

Frequently asked questions

How long does it take to train a mentor?

The basics are quick to learn: a few hours are enough to understand the method. What matters most comes next: practising with a first learner, with follow-up.

Should the mentor get a bonus?

It isn’t mandatory. But recognizing the role is strongly recommended. A bonus, an official title or protected time show that training matters to the company.

How many learners can one mentor handle?

One or two at a time. Beyond that, they no longer have time to watch each learner and correct mistakes.

Does mentoring count toward the 1% law?

Structured, documented mentoring generally counts. You need objectives, follow-up and proof: who trained whom, on what and for how long.

Want to prepare your best operators to become real mentors? Witeach trains your mentors and turns their know-how into clear training, so every new hire learns quickly and well.

Free succession plan →Talk to an expertExplore the platform

Share this article

What if we preserved your experts’ knowledge?

Every retirement takes years of experience with it. Let us talk about how to capture and pass on that knowledge before it leaves.

Let us discuss your needs