← All articles

The auditor walks onto the floor. They pick an operator at random. Then they ask a simple question: “How do you know this person is competent for this job?” If your answer is “They’ve been here ten years”, you risk a nonconformity. Here’s how to be ready, without panicking.

Key takeaways

  • ISO 9001 clause 7.2 asks for four things: define competence, check that people have it, close the gaps and keep the proof.
  • Experience counts. But it must be demonstrated and documented.
  • The most forgotten point: checking that training actually worked. An attendance sheet isn’t enough.

In this article

  1. What clause 7.2 requires, in plain words
  2. What the auditor really looks at
  3. Evidence that holds up
  4. The most forgotten point: effectiveness
  5. Get ready in 5 steps

What clause 7.2 requires, in plain words

Clause 7.2 of ISO 9001 is about competence. It covers everyone whose work affects quality. In short, it asks for four things:

1

Define

For each job, write down the competence needed to do the work well.

2

Check

Make sure each person has that competence, through training, education or experience.

3

Act and measure

When competence is missing, act (training, pairing) and check that it worked.

4

Prove

Keep documented evidence of each person’s competence.

None of this is complicated. The problem is that the evidence is often scattered, incomplete or outdated on audit day.

What the auditor really looks at

The auditor doesn’t read every file. They take samples. They often follow this path:

  • A person at a workstation. What competence does this job require? Where is the proof they have it?
  • A new employee. How were they trained? Who confirmed they were ready?
  • An employee who changed jobs. Were they trained for the new job?
  • A temporary or agency worker. They work under your control, so they’re covered too.
  • A recent training session. How did you check it was effective?

Evidence that holds up

Not all evidence carries the same weight. Here’s the difference:

✅ Strong evidence

  • An up-to-date, dated skills matrix
  • A training record: date, content, trainer
  • A signed, hands-on assessment at the workstation
  • Certificates and test results
  • A job description listing the required competence

❌ Weak evidence

  • An attendance sheet only
  • “They’ve been here ten years”
  • An Excel file with no date or signature
  • Training with no assessment at all
  • Documents nobody can find

A skills matrix answers the auditor’s first question at a glance. A reliable training record provides the details.

The most forgotten point: effectiveness

The standard asks you to evaluate the effectiveness of the actions taken. In other words: did the training work? An attendance sheet proves the employee was in the room. It doesn’t prove they learned.

Four simple ways to measure effectiveness:

  • Observation at the workstation: the supervisor or mentor confirms the task is done right.
  • A short test: a few practical questions at the end of the training.
  • Indicators: fewer errors, less scrap or rework after the training.
  • A 30-day follow-up: is the employee still applying what they learned?

The “show me” method, used by good mentors, is the most natural way to do this check.

Get ready in 5 steps

1

List jobs and their competence

For each job, a short list of required competence. Think of the tasks that are critical for quality.

2

Update the matrix

One level per person and per task. Check new hires and people who changed jobs.

3

Check the evidence

For every “autonomous” person, there must be proof: training, assessment or certificate.

4

Close the gaps

Training or pairing for the gaps. Then an assessment, to close the loop.

5

Run a mock audit

Pick three employees at random. Try to find their evidence in under five minutes.

A good competence audit isn’t prepared the week before. It’s prepared every time training is delivered.

Up-to-date visual work instructions also help. They show the auditor that the right method is known and posted at the workstation.

Frequently asked questions

Is experience enough as proof of competence?

The standard recognizes experience. But it must be demonstrated. A dated, signed hands-on assessment at the workstation turns “ten years of experience” into solid evidence.

Does the evidence have to be on paper?

No. Digital records are accepted. What matters is that the evidence is complete, protected and easy to find.

Are temporary employees covered?

Yes. The clause covers anyone who works under your control and whose work affects quality, including agency staff.

How long should evidence be kept?

ISO 9001 doesn’t set a specific period. Set a clear rule in your quality system. For Quebec’s 1% law, supporting records are kept for six years.

Worried about your next audit? Witeach organizes your training, assessments and competence evidence in one simple platform, so you can answer the auditor in a few clicks.

Free succession plan →Talk to an expertExplore the platform

Share this article

What if we preserved your experts’ knowledge?

Every retirement takes years of experience with it. Let us talk about how to capture and pass on that knowledge before it leaves.

Let us discuss your needs